For greater pressure applications
Vertical multistage centrifugal pumps with radial flow impellers. Inline construction simplifies plumbing and saves a lot of floor area when compared to other types of pumps. Thermal protection is included for all single phase motors. The control system is built with PLCs, microcontrollers, and variable frequency drives (VFDs) for constant pressure, energy savings, and fail-safe automatic operation.
Horizontal multistage pumps of the “MH series” are end suction and top discharge types with radial flow impellers for larger head requirements. These centrifugal monoblock pumps are available in single phase and three phase power supplies. For longevity, the majority of the wetted elements of the pumps are composed of corrosive resistant stainless steel material. Thermal protection is provided for all single phase pumps.
Related Products
SCW Series
Case with Horizontal Split Single stage double suction centrifugal pumps are intended to give a higher flow rate at the specified operating head. The hydraulic balance provided by the double suction impeller with between bearing design eliminates axial thrust.
ECW Series
The ECW series features a single stage, end suction, back draw out, and top centreline discharge. These are available in a variety of building materials to handle both clear and muddy raw water. For long life, a dynamically balanced impeller ensures vibration and noise free operation.
Submersible Pumps Single Channel Impeller
The MA series submersible sewage pumps are equipped with a semi-open single channel impeller that allows them to handle fibrous material without clogging. It is capable of handling solids up to 112″ in diameter. Pumping municipal wastewater, industrial waste water, landfill waste water, rain water, and activated sludge is possible with these pumps.
Submersible Pumps Multi-Channel Impeller
The KC Series submersible sewage pumps include a multi vane design that improves performance by allowing for bigger solid passages up to 6.5″ in diameter. The closed multi vane impeller for solids-laden and muddy fluids provides the maximum waste water efficiency. These pumps may pump municipal waste water, industrial waste water, landfill waste water, rain water, and activated sludge, among other things.
Mobile Dewatering Pumps
The WD series skid-mounted well point and general-purpose dewatering pumps are designed to handle raw water, muddy water, sewage, and semi-solid liquids. These pumps include a vacuum pump and a priming tank for automatic self-priming and re-priming. The gasoline tank is designed to provide continuous fuel supply for 24 hours of operation.
Stainless Steel Submersible Pumps
The CRI 4″, 6″, 8″, and 10″ stainless steel series submersible pumps have built-in check valves and are made of corrosion-resistant stainless steel. These pump models’ essential parts are composed entirely of premium 304/316 grade stainless steel, and the shaft is made of S.S. 304/ 329/ 431.
Submersible Motors
These motors are environmentally friendly, wet, water-filled, and rewindable. Waterproof synthetic film insulated copper winding wires are used for the stator windings. It has thrust and journal bearings that are lubricated with water.
DC Solar Submersible Pumps
D.C. Solar submersible pumps are pumps that are specifically built for solar uses. Pump rotors are screw-type and are powered by a brushless DC motor. These motors are extremely efficient and long-lasting. These pumps come in a variety of power and voltage specifications.
Permanent Magnet Synchronous Motor for Solar Pumps
PMSM submersible motors are specialized motors manufactured of high-quality stainless steel. These motors are linked with 4′′ submersible pump ends, run at synchronous speed without slip, and are 10%-15% more efficient than similar rated AC induction motors. PMSM motors come in a variety of power and voltage specifications.
AC Solar Pump Controllers
AC Solar pump controllers convert the direct current (DC) electricity provided by PV modules to three phase alternating current (AC), which powers any AC three phase submersible or surface pump. Solar controllers come in a variety of power and voltage specifications.
Vertical Turbine Pumps
Vertical turbine pumps can be single or multistage, with submerged impellers that allow the pump to start without priming. VT pumps are designed to operate in the presence of considerable changes in water level. For increased flow requirements, these pumps are equipped with a mixed flow or axial flow impeller.
Municipal Water Applications
Our Products and Services
MBA Pumps, a CRI Distributor, provides a wide range of services designed to assist you maximize your pump investment. To find out more, get in touch with us.
Request a quote!
Contact our customer service using the information below if you want to know the price. They will be happy to assist you.
CONTACT US via Email
Talk to our engineers?
You can get in touch with one of our engineers personally if you wish to talk to him or her about certain technical issues.
CONTACT US via Email
Inquire about visits?
We can arrange a time for our sales engineers to come see you if you need them. Just get in touch with us. They’ll ready
CONTACT US via Email